Our Blog: Heating, Cooling & Plumbing Insights

Your go-to resource for HVAC and plumbing solutions, DIY guides, and home maintenance tips.

Got an emergency? Call 972-914-0833 or …

Explore by topic:

Posted in Plumbing

7 Signs You Have a Water Main Line Problem

Think about how often you use water in your home. Washing dishes, taking a shower, washing your hands, doing laundry and cooking are only some of the ways that we use water during the day. With all of this use it comes as no surprise that sometimes water main lines become damaged.

You may be suspicious that you have a water line issue, but without a professional plumber to inspect your system, it’s hard to tell for sure. Continue reading for seven signs that you may have a water main line problem.

If you are ready to schedule plumbing Grand Prairie TX, give our team at Dial One Johnson Plumbing, Cooling and Heating a call at 972-291-0740.

1. Frequent Clogged Drains

While a clog here and there is nothing to worry about, if you are constantly getting clogs then there may be a bigger problem at hand. This is especially true if you are getting multiple clogs in different drains. If this is the case, then you may have a clog in your water main line. You will need to call a plumber so that they can complete a camera pipe inspection and locate the clog. Once they have located the clog they will be able to remove it with a hydro jet or a drain snake. Be sure to contact your plumber as soon as you start to notice multiple, frequent clogged drains.

2. Low Water Pressure

If you have started to notice lower water pressure than usual in all of your fixtures, then you may have a water main line problem. Low water pressure in just one fixture is indicative of a problem with that specific fixture. Low water pressure from your water main line could be caused by a clog or a water leak. If the problem is a water leak then a plumber will have to locate and repair the leak. Depending on the location of the leak, this could be a quick and easy process, or a long arduous one. You need to call a plumber when you notice low water pressure in all of your fixtures so that the problem doesn’t get worse.

3. Discolored Water

Your water should be just about crystal clear when you turn it on. If your water has sediment, is orange or has any other discoloration issues then you probably have an issue with your water main line. Again, make sure that the issue is evident with all of your fixtures. If it is only coming from one fixture then the problem is with that specific fixture and not the water main line. Sediment in water could be caused by a water leak and orange-tinted water could be caused by rust. These can be dangerous to drink or bathe in, so be sure to contact a plumber as soon as you notice any kind of discoloration in your water.

4. Noisy Fixtures

If you are starting to notice that your fixtures are making noise when you use them, then you may have an issue with your water main line. Examples of weird noises would be banging pipes, gurgling from one fixture when you use another or the sound of constantly running water. The sound of constantly running water could mean that you have a water main line leak in your Grand Prairie home. Banging pipes, on the other hand, could mean that the main line water pressure is too high. Make sure that you get in contact with a professional plumber to assess and resolve the situation.

5. High Utility Bills

Next time you get your utility bills, check the cost of water. If it has been rising with no explanation, then you may have a leak in your water main line. A water main line leak is serious because of the hundreds of gallons of water that travel through it. With a leak, you could be wasting gallons. This would cause a large increase in your monthly water bills. The best way to take care of this issue is to call a plumber. They will be able to complete a thorough inspection and decide the best solution to repair or replace the pipe.

6. Strange Puddles in Yard

If you take a look out your window and see puddles of water in your yard, even though it hasn’t rained recently, then you may have a burst water main line. Puddles of water in your yard means that the leak is major and requires the attention of a plumber right away. The plumber will use a camera pipe inspection tool to locate the pipe. Then they will either excavate and replace the pipe or use a non-invasive method to repair the pipe. Either way, this is a situation that could become worse over time and needs to be taken care of immediately.

7. Pests

If you have noticed a sudden infestation of pests, then you may have a water main line leak. These leaks can occur inside or outside of the home. Depending on where the leak is, the humidity could attract pests inside your home. If you start to see pests along with one or two other items on this list then you should be especially concerned that you may have a leak. Make sure that you call both pest control and a plumber if you encounter this issue.

Trustworthy Plumbing Grand Prairie, TX

For a dependable plumber Grand Prairie, Texas, you need Dial One Johnson Plumbing, Cooling and Heating. We provide only the best customer service paired with excellent workmanship. All of our plumbers are highly experienced and trained so that they can take on any plumbing issue.

With over 50 years of experience in the industry, we have the tools and knowledge necessary to provide high quality service. Our team’s number one priority is customer satisfaction. This is why Grand Prairie residents choose Dial One Johnson Plumbing, Cooling and Heating for plumbing they can trust.

To schedule an appointment with the Dial One Johnson Plumbing, Cooling and Heating, give us a call at 972-291-0740 or contact us online.

Author Bio:
Sherrie Johnson-Hartsock
Dial One Johnson Plumbing, Cooling & Heating is now owned and operated by Sherrie Johnson-Hartsock, with his grandson, Daniel Johnson, a third-generation plumber who is also the Service Manager.

Posted in Plumbing

Where Are the Shut Off Valves in a Dallas Home?

Whenever you want to do plumbing repairs in Dallas, whether it is to change a leaky faucet or fix knocking pipes, you need to know how to shut off the main water line, or supply. But, most homeowners do not know where their main shutoff valves are, especially if they have just moved in or are renting a home that is unfamiliar to them.

Here are some common places you can look for shutoff valves:

Water Meter – The water meter, which you can usually find in your basement or just outside your home, will have a shutoff valve attached directly to it. Usually, there will be two shutoff valves – one on each side of the meter (supply and home). To effectively shut off your water supply, turn the valve located before the meter.
Toilet Supply – Sometimes you do not need to cut off the main water supply to your entire house if you’re just doing bathroom plumbing. It can be disruptive and the people in your home may not appreciate not having drinking water or a shower while you are working on the plumbing. So, when working on the toilet, always look for the toilet water valve located behind the tank. Sometimes this valve will be on the floor – other times it will be located on the wall just behind the tank.
Finding the Supply Line – Sometimes the water supply may not be located where you would expect. It might be behind appliances or access panels or above your head somewhere. Most of the time, the water supply will still be in the basement, so start there and look carefully for the root of the pipes. Since most of the pipes in your home will originate at the supply line, you can usually trace them back to a single source.

If you still cannot find your main water supply line and shutoff valve, that does not mean it is hidden in the floor somewhere or outside. Sometimes, the supply lines are just in odd places, because of either strange construction or poor renovations by a past owner. If this is the case, get a second pair of eyes to help you hunt or as a last-ditch option, call a plumber who will be able to more easily follow the lines back to their source. Nine times out of ten, you should be able to find and handle the main water supply on your own. But never rule out calling Dial One if things get more complicated than anticipated. If you need help replacing your main water shut off valve, our Dallas plumbers can help with that too!

To learn more, contact us online or at 972-573-4539.

Posted in HVAC

Your Pre-Winter Furnace Checklist

The last thing that you want is to turn on your furnace when the temperature starts to drop, only to find that it won’t start. Every year, just before winter, you should be completing some kind of furnace care. After so many months of dormancy during the hot Texas summers, completing furnace maintenance will prepare it for heavy winter use.

Your home furnace needs maintenance. While furnaces are incredibly durable, just like any other system, they can become damaged through normal wear and tear. Completing your own maintenance as well as scheduling regular maintenance can help you stay on top of normal damages and prevent unexpected ones.

Continue reading to find out what you need to do for your furnace before the temperature drops.

Importance of Professional Furnace Maintenance

While there are many things that you can do to prepare your furnace for colder temperatures, the best thing that you can do is schedule professional maintenance. A professional technician will be able access and inspect certain components of your furnace that you may not be able to by yourself.

There are many benefits to scheduling regular furnace maintenance, including:

Increased efficiency
Reduced likelihood of damage
Lower energy bills
Longer lifespan

For reliable furnace service, trust Dial One Johnson Plumbing, Cooling and Heating. If you would like to schedule Cedar Hill air heating and air conditioning maintenance, give our team a call at (972) 291-0740.

Pre-Winter Furnace Maintenance Checklist

While scheduling professional maintenance is the best way to take care of your furnace, there are also things that you should do yourself. Most of these tasks are easy and don’t require much time or expense. Take a look at this pre-winter furnace maintenance checklist:

Replace the filter: many homeowners aren’t aware that the furnace has its own filter. It is recommended that you change the filter four times a year. It is also important that you change all of your household filters at least once a month. Doing this will improve air quality and protect your systems from overheating. When filters become clogged, they force the system to work extra hard which often leads to overheating and higher energy bills. You can purchase filters at any home improvement store and some grocery stores.
Open air vents: open any return and supply registers that you may have closed over the summer. Be sure to double check that there is no furniture or rugs covering any of the vents. Doing this will ensure that you remain comfortable in any season.

Check burner flames: turn on your furnace and take a look at the burner flames. You want them to be blue and of an even size. If they are not blue or an even size, then your burner needs to be cleaned. This is something that you can do by yourself as long as you completely disconnect the furnace. If you are uncomfortable doing this, you can also request your technician to do it when they come for maintenance.

Listen for odd noises: turn on your furnace and take note of any strange noises. An odd noise could be caused by a slipped blower belt or rusty moving parts. Make sure to let your technician know about the noise you heard when they come to provide maintenance.

Inspect your chimney: take a look at your chimney and check for any nests or other debris buildup. Make sure to clean the area and brush away soot. Doing this improves the efficiency and safety of your furnace.

Seal leaks: properly sealing around your windows and doors can make a huge difference in the efficiency of your system. Take a look around for any sealant that may be falling apart or weather stripping that may be coming off. Replace these faulty sealants so that the warm air stays in.

Clean your windows: when you clean your windows you are ensuring that natural light is able to shine through. This helps to naturally warm your home a bit more. If you maximize this natural warmth enough, you may even be able to lower your furnace and save on your energy bills.

Install a carbon monoxide detector: if you do not already have one, install a carbon monoxide detector right next to your furnace. Every furnace has a heat exchanger which helps to move heat from the burners to the air. Over time, a heat exchanger may become cracked and begin to leak carbon monoxide. This is extremely dangerous and can even be fatal. Installing a carbon monoxide detector next to your furnace alerts you to a leak before it is able to get inside of your house. If your carbon monoxide detector goes off, call a technician right away and shut off your furnace and gas line.

Schedule HVAC Cedar Hill, TX Maintenance

Scheduling furnace maintenance provides access to a professional who can check any components or complete any tasks that don’t fall in the “DIY” territory. Here are a few of the tasks that a professional HVAC technician may complete while doing furnace maintenance:

Lubricate moving parts
Tighten belts and connecters
Check electrical wiring, outputs and inputs
Check gas line connections
Inspect and clean air ducts
Check pilot light and ignitor switch
Check heat exchanger for cracks

For Cedar Hill air heating and air conditioning maintenance and other services, call Dial One Johnson Plumbing, Cooling and Heating. Our team has the qualifications and training necessary to effectively complete maintenance. We always keep our trucks stocked up so that if a technician comes across an issue that requires immediate furnace repair, they have all the tools and equipment that they need.

At Dial One Johnson, we believe in honesty, integrity and dependability. We have proudly upheld these values throughout all of our 50 years of service in Cedar Hill and the surrounding areas. When you hire our technicians, you can feel confident that they will get the job done right the first time.

For excellent service that you can trust, call Dial One Johnson Plumbing, Cooling and Heating at 972-291-0740 or contact us online.

Posted in HVAC

Do Not Wait to Schedule Your AC Repairs

If you have noticed an issue with your air conditioner, you need to call a technician right away. Whether you hear a strange noise or the system not working as well as it used to, a technician will be able to quickly identify the problem. When you wait weeks, or even days, to schedule an appointment you are only making matters worse.

To avoid the need for repairs in the first place, be sure to schedule regular air conditioning maintenance. This kind of preventative care will substantially lower the risk for unexpected damages and repairs. Although, even with regular maintenance, sometimes air conditioners become damaged from normal wear and tear. Whether or not you schedule regular maintenance, repairs require prompt action

Continue reading to find out the dangers of waiting to schedule air conditioning service.

If you are ready to schedule AC repair, then you need Dial One Johnson Plumbing, Cooling and Heating. Give us a call at (972) 291-0740 to schedule an appointment today.

Dangers of Waiting to Schedule AC Repair

When you wait to schedule AC repair, you open yourself and your air conditioner up to a plethora of problems. Think about it this way: if you develop an infection, would you wait a few weeks to go to the doctor? Probably not, because the infection could spread, making it harder and more expensive to treat. Not to mention that it would be more difficult to complete easy, daily tasks.

Air conditioners function in a similar way. Even though they’re mechanical, if they develop an issue that goes unassessed, the situation becomes much worse. Take a look at five reasons why you should not wait to schedule AC repair.

1. Problem Will Get Worse

An air conditioner issue can quickly become worse if left neglected. For example, a screeching noise coming from the air conditioning unit could be a sign of motor damage. If the motor continues to operate while damaged, it could lead to a burn-out and eventual system failure. Even something as straightforward as a clogged filter can lead to system failure.

There is one main reason why an issue, even a small one, can lead to system failure. When an AC unit becomes damaged, it has to work harder to produce the same amount of cooling that it did prior to the damage. This constant overwork puts stress on other parts of the system. As the other components become damaged due to stress, the unit will begin to fail. To avoid a system failure, you need to schedule AC repair as soon as you notice even the smallest issue.

2. More Expensive

As the damage in your air conditioner gets worse, it also becomes more expensive to repair. Just like any system, each component relies on the others to function. You may start with only one or two damaged components, but eventually you may have to repair three or four components.

Neglecting relatively inexpensive repairs can also lead to larger expenses. For example, a new air filter is less than $20, but a brand new air conditioning unit is far more expensive than that. Whatever the issue is, big or small, getting it repaired right away will save you money.

3. Lower Indoor Air Quality

When an AC unit is left neglected, it can become dirty and have poor performance. When repairs aren’t done, the airflow can decrease. Other air quality factors, such as humidity and dust, also worsen. This is especially true when it comes to dirty filters, broken blower blades and other parts that are commonly associated with air quality.

When you repair a damaged air conditioning unit, you are also improving your air quality. You will note better airflow and improved comfort within your home. The air will also feel less sticky and be free of dust, debris and allergens.

4. Shorter Lifespan

When you let air conditioner issues sit for weeks without repair, the system becomes far less efficient. When an air conditioner, or any other home system, has to work extremely hard to produce the desired comfort level, they age faster. With proper, regular maintenance and quick repairs, an air conditioner can last up to twenty years.

Unfortunately, some homeowners choose to wait to get the repairs that they need when they need them. In these cases, their system may only last for fifteen years or less. Replacing an air conditioner is a large expense and neglecting repairs means replacement only becomes more frequent.

5. Reduced Efficiency

Damaged air conditioners have to overcompensate when it comes to cooling. This leads to far less efficient air conditioners. When your AC unit becomes less efficient, it leads to many of the issues highlighted above: higher energy bills, risk of unexpected repairs and shortened lifespan.

Scheduling repair for your air conditioner will help you save money in the long-run and will improve the comfort of your home. No one wants a barely-functioning air conditioner in the middle of a Texas summer. It doesn’t matter how expensive or high-end the air conditioner is. When any system or appliance is overworked or damaged, it doesn’t operate as well as it once did.

Trustworthy Red Oak Heating, Cooling and Plumbing

Scheduling air conditioning repair when you need it is imperative to maintaining full efficiency and functionality. Neglecting these issues only makes matters worse and more expensive. As soon as you notice any kind of air conditioner issue, you should schedule an appointment with a technician.

Don’t waste your time searching “air conditioning repair companies near me” when you could just choose Dial One Johnson Plumbing, Cooling and Heating. Our team has the qualifications and expertise necessary to provide high quality Red Oak heating, cooling and plumbing services. Serving Red Oak and the surrounding areas for over fifty years, we have years of industry experience and excellent customer service under our belt.

From slipped blower belts to cracked heat exchangers, our technicians are ready to provide reliable service. At Dial One Johnson Plumbing, Cooling and Heating, we know the importance of dependability and honesty.

If you are ready to schedule an appointment with our experienced team, give us a call at 972-291-0740 or contact us online.

Posted in HVAC

When To Repair and When To Replace Your Heating System

There comes a time for every homeowner when your furnace just doesn’t work as well as it used to. When homeowners experience a less efficient furnace, their first thought is whether it needs to be repaired or replaced. Many homeowners dread replacement because it’s expensive and can take a long time. But, repairs and replacements shouldn’t be feared. These services have many benefits and can even save you money in the long run. If you are unsure as to whether you need a repair or a replacement, continue reading!

If you are ready to schedule reliable furnace and heating system services, call our Dial One Johnson team at 972- 291-0740.

Repairing your Heating System

Scheduling a repair for your heating system is incredibly important. If you notice anything that doesn’t look (or smell!) right, you need to schedule service right away. Furnaces that aren’t repaired right away get worse and become less efficient. Don’t let your furnace get to that point and schedule repair services as soon as you notice that something is off.

Scheduling repairs can definitely be an inconvenience and a blow to the wallet. But, there are also many benefits to furnace repair:

Fixes the problem before it gets worse
Increases overall efficiency
Extends lifespan
Far less expensive than a replacement

Furnace repair shouldn’t only be viewed as a nuisance when there are so many good things that can come out of it. Determining when your furnace needs a repair can be difficult. Take a look at some of the most common furnace repairs and signs that you may need one:

Dirty ductwork: if your furnace is not heating your home as well as it used to or you have begun to notice a decline in your air quality, you may need to schedule ductwork cleaning. When your ducts get dirty, they can restrict airflow. This causes your furnace to work extra hard which in turn can cause inefficient heating and sometimes system damage. Ductwork cleaning is a simple repair that can make all the difference in your furnace.
Starting issues: have you noticed that your furnace isn’t starting quickly or isn’t starting at all? This could be a sign that you need a repair. Some furnaces use a pilot to start the system and others use an electrical ignition. Regardless of which one your furnace uses, you need to call an HVAC specialist to come repair it. Both the pilot light and the electrical ignition can be repaired or replaced.
Blower issues: as you use your furnace, the blower develops normal wear and tear. Sometimes this can cause the blower belt, fan or bearings to become damaged. Typically, homeowners can catch this issue when they hear a strange noise coming from their system. An HVAC repairman can easily repair or replace the belt, fan or bearings so that your furnace can continue providing optimal comfort.
Limit switch malfunction: the limit switch controls how much heat your furnace is producing. If it goes over a certain temperature, the limit switch will turn it off. This protects your furnace from overheating and your home from fire hazards. You will be able to tell if your limit switch is malfunctioning when your furnace is continuously running, especially if your home is already heated to your liking. This issue can quickly become dangerous so make sure to call an HVAC technician right away to replace the switch.
Thermostat issues: many homeowners don’t realize that a huge amount of furnace problems stem from a malfunctioning thermostat. The thermostat tells your furnace what temperature to reach. If the thermostat malfunctions and cannot properly communicate that to your furnace, then it may never reach that temperature. If you notice that your furnace is constantly heating more or less than what you have set on your thermostat, then it is time to call an HVAC specialist.

There are many more signs that can tell you if your heating system needs to be repaired. Just remember this: if your heating system is under 15 years old, does not require frequent repairs and usually provides effective heating, then you most likely just need a repair not a replacement.

Replacing your Heating System

Most homeowners dread replacing any kind of system. However, the most difficult part of replacing your heating system is feeling confident that it actually does need to be replaced. Here are some ways you can tell if your heating system needs to be replaced:

It is over 15 years old
It requires frequent repairs
It doesn’t heat as efficiently as it used to
Maintenance and tune-ups aren’t doing much to increase efficiency
Your energy bills are higher
It becomes irreparably damaged

If most or all of the above parameters are true for your heating system then you probably need a furnace replacement. If you still aren’t sure, all you have to do is call an HVAC technician to check it out. They can determine if your furnace still has a few years left or if it is on its last legs.

Heating System Repair and Replacement in Duncanville, TX

If you are looking for an excellent heating system repair company in Duncanville, TX, no need to search “heating repair near me.” Dial One Johnson Plumbing, Cooling and Heating is the best choice for Duncanville residents. We offer HVAC repairs, maintenance, installations and replacements for a variety of systems including heat pumps, furnaces, air conditioners and more.

With over 50 years of experience in the industry, we have the experience and knowledge necessary to provide only the best service. Our team is dedicated to providing reliable service with a friendly smile. When you hire Dial One Johnson Plumbing, Cooling and Heating, you can trust that you will only get the service and recommendations that you actually need.

With Dial One Johnson, you never have to search “hvac repair near me” again. Give us a call at 972-291-0740 or contact us online to schedule high quality service that you just can’t beat.

Posted in HVAC

Signs It’s Time to Call for Water Heater Repair in Midlothian, TX

Water heaters, like all home systems, require yearly maintenance. Scheduling water heater maintenance increases efficiency, extends the lifespan and reduces the risk of unexpected repairs. However, even with yearly maintenance, sometimes water heaters become damaged from regular use. This is normal and happens especially with older water heaters. It is important that you schedule service as soon as you notice that something is wrong with the system.

If you are ready to schedule water heater repair Midlothian, TX, then give Dial One Johnson a call at 972-291-0740.

Importance of Scheduling Water Heater Service

It is imperative that you schedule water heater service as soon as you notice an issue. If you wait too long then you may face major consequences. Waiting to schedule water heater repair can result in:

Lower efficiency
Higher energy and water bills
System failure
Problem getting worse
Expensive repairs

Sometimes it’s difficult to detect a water heater issue because you aren’t near the actual system. This is why it is important to check on your water heater every once in a while to look for anything strange. You should also take note of any issues with the hot water itself. Here are common signs that you need to schedule water heater repair.

Strange Noises

If you start to hear popping, rumbling or banging coming from your heater then you need to call a plumber. These noises could mean that the heater is just getting too old to work efficiently and needs to be replaced. Popping noises could mean that there is a sediment build up. The noise is caused by the sediment moving around as the water boils in the tank.

A plumber will be able to quickly identify the cause of strange noises. After they have done this, they may recommend repair, cleaning or full system replacement. Noises coming from the water heater is not something that you should wait to get checked out. The longer that you wait, the worse the problem can get.

Water Heater Leak or Pooling

A water heater leak can cause major damage if not taken care of right away. Pooling on the ground can cause structural damage, mold growth and more. If you notice a substantial leak, you can turn off the water supply until a plumber can get there. There are a few causes of water heater leaks:

Cracks: as metal heats and cools it expands and contracts. This constant movement can cause the metal to crack and leak water.
Corrosion: in older water heaters especially, the metal can become rusted and begin to corrode. This can result in holes that will begin to leak water.
Connection leak: the leak may be coming from a connection rather than from the heater itself. If the pooling occurs around the water supply line, hoses or valves then it is most likely a connection leak.

If your water heater is cracked or corroded then you will most likely need to replace the entire system. A connection leak is often easy to fix and only requires a component replacement or tightening.

Contaminated Water

You may notice that your hot water looks different than usual. Here are three common types of contaminated water and their possible causes:

Sandy: if you see sand or grit in your water then there is most likely a buildup of sediment in the water heater.
Rusty: if your water develops a reddish tint and a metallic odor and taste, then you could be dealing with rust. Water heaters often develop rust within the tank or in the pipes.
Cloudy: if you notice that your hot water is cloudy and has a strange taste or smell, it could be the result of mineral deposits.

To resolve these issues you will need to call a professional plumber. They will be able to provide a thorough inspection and determine whether the water heater simply needs to be drained or if it requires a repair or replacement.

Lack of Hot Water

There are many reasons why a water heater may not be heating as effectively as it used to. One of these is sediment buildup. As the sediment settles to the bottom of the tank, it covers the area where the burners are and blocks the heat. It is possible that the burners themselves are malfunctioning and not properly heating the tank.

To determine exactly what is causing a lack of hot water from your water heater, you will need to contact a plumber. They can provide an inspection and quickly find the root of the problem.

Temperature and Pressure Relief Valve Issues

When the temperature gets too high in the water heater, the temperature and pressure relief (TPR) valve releases. This helps to bring both the temperature and the pressure down in the water heater. Sometimes, the TPR valve rusts or corrodes over time. This can become dangerous and put your water heater at risk.

Make sure to test the TPR valve every once in a while by pulling the lever. If the valve does not open and shut as you pull the lever then you need to call a plumber. Typically, the valve can be easily replaced without having to replace the entire system.

Reliable Water Heater Repair Midlothian TX

If you have come across any of these signs in your water heater then you need to contact a Midlothian plumbing company. The plumber will be able to inspect and identify the problem along with the best solution.

For a reliable Midlothian plumbing company, contact Dial One Johnson Plumbing, Cooling and Heating. With over 50 years in the industry, we know exactly what it takes to provide excellent service. All of our plumbers are highly qualified, experienced and ready to take on any water heater challenge.

We are dedicated to providing high quality customer service and dependable plumbing that you can trust. When you hire Dial One Johnson, you will feel confident that your water heater is in the right hands.

To schedule an appointment, give us a call at 972-291-0740 or contact us online.

Posted in HVAC

How to Choose an HVAC Repair Service Company

The most important part of scheduling HVAC services is choosing the right company. If you choose someone with minimal experience or the wrong equipment, you may end up with an even bigger problem down the road. You don’t need a subpar HVAC company to give you a temporary solution.

What you need is an affordable and reliable HVAC company that can provide you with many different options. If you are struggling to find a great HVAC company, continue reading for tips on finding the right one for you.

For a trustworthy HVAC company, you can rely on Dial One Johnson Plumbing, Cooling and Heating. Give us a call at 972-291-0740 to schedule an appointment today.

Importance of Choosing the Best HVAC Service Company

Scheduling maintenance and repairs for your air conditioner is incredibly important. This is why choosing an excellent HVAC company matters. When you hire the right HVAC company you can expect:

Prompt service
Professional equipment and uniform
High quality mechanical service
Friendly and knowledgeable technicians
Thorough inspections
Duct and system cleaning

When an HVAC company that has all of the above services your system, you can be sure that they will do an excellent job. Excellent technicians will be able to increase the efficiency of your system and reduce your monthly energy bill. With great service and regular maintenance, your HVAC system will last longer and require fewer future repairs.

Tips on Choosing HVAC Service

We all want to hire the most reliable HVAC company with high quality service. However, it is easier said than done. Take a look at these tips on how to choose quality HVAC service:

Look at reviews: you can find reviews for HVAC companies on Google, Yelp, HomeAdvisor and many other online sites. Keep your eye out for especially high and low reviews. Doing this allows you to see what customers loved and what customers hated about the service.
Head to their website: unless the company is just starting out, they should have a professional-looking website. Check it out and read a few of their webpages to see if it aligns with what you are looking for.
Ask for references: most companies are happy to provide references to potential customers. If the company refuses, you can cross it off your list.
Look for honesty: an HVAC company should be known for its honesty. If you spot customer reviews that accuse a company of trying to push unnecessary heating and AC repairs or replacements, don’t hire them.
Inspections: don’t hire a contractor that offers a free estimate over the phone. Even if you describe the problem to a contractor over the phone, there are few different things that could likely be wrong. This is why great contractors will offer an inspection before they provide you with an estimate.
Licensing: some states require a license for HVAC contractors to practice. In the state of Texas, contractor licenses are required. Even if they aren’t required in your state, it can give you peace of mind that they have the proper qualifications.
Certification and training: ask the company if they require their technicians to go through any sort of training, such as a certification course, before they hire them. This gives you an idea of which companies are looking to provide excellent service.
Experience: how long has the company been in operation for? While experience does not necessarily determine quality, it can give you an idea of how much industry knowledge a company has.
Take a look at their prices: some companies will offer ball-park estimates on their website. Be wary of prices that seem too low or too high. You should aim for a company whose prices are moderate and fair.
Insurance: make sure that a company has insurance before you hire them. This protects you and the company from having to pay for unexpected damages caused by service.
Rebates and coupons: check to see if the contractor offers any rebates or coupons. While this does not necessarily distinguish great contractors from okay ones, it is nice to have financial incentives and savings available.
24/7 emergency service: make sure that the company you hire offers 24/7 service. This is important if you experience a system failure or some other kind of HVAC emergency outside of regular business hours. You want to hire a company that will go out of their way to provide the service you need when you need it.
Ask for a contract: a great HVAC company will be willing to write a contract for you once they have completed an inspection. They should include the agreed-upon price of service in the contract.
Ask about their safety measures: you’ll want to be sure that a company’s technicians are drug-tested and practice safety while working. It’s not easy to let a stranger into your home to provide a crucial service. Asking about a company’s safety measures can help put your mind at ease.

These are not the only things that you should consider when choosing an HVAC company. They are, however, what you should check at the very least. Following these tips will help you avoid scams and shoddy workmanship.

Quality HVAC Service Midlothian, TX

Choosing an HVAC Midlothian contractor is incredibly important for making sure you get reliable and affordable service. That is why so many Midlothian residents choose Dial One Johnson Plumbing, Cooling and Heating for their HVAC services. With over 50 years in the industry, we understand the importance of customer satisfaction and excellent workmanship.

We make sure that all of our technicians are highly skilled and qualified. Our team always provides thorough inspections and repairs using advanced equipment. At Dial One Johnson, we believe in transparency and honesty. Because of this, our customers know that we will never try to push repairs or replacements that you don’t actually need.

When you hire Dial One Johnson for your HVAC service Midlothian, you will receive high quality service that you can trust.

To book an appointment with our team, contact us online or give us a call at 972-291-0740.

Posted in Plumbing

Understanding the Benefits of a Drain Pipe Camera Inspection

Homeowners schedule yearly inspections of their AC units, furnaces, air ducts and other appliances. However, they often neglect to schedule inspections of their drain pipes. Scheduling a drain inspection is like scheduling a blood test. We can’t see what’s going on inside of our bodies, but knowing what’s going on can help us take care of them better.

Think about how often you use water in your home. Washing dishes, doing laundry, bathing and cooking are only a few of the daily tasks in which homeowners use water. Because we all rely so heavily on our drain pipes, it’s important that we schedule yearly inspections.

To schedule a drain pipe camera inspection with a reliable and qualified plumber in Desoto, TX, call Dial One Johnson at 972-291-0740.

Drain Pipe Camera Inspection Equipment and Process

Plumbers complete drain camera pipe inspections by using a camera attached to a long, flexible cable. The cable is inserted into the pipe. The plumber then follows along on the screen as he slowly pushes the cable through the pipe. As he does this he keeps an eye out for corrosion, cracks, clogs, vermin and more.

Pipe cameras allow plumbers to identify the exact cause of a problem and the location. Using this technology, plumbers no longer have to dig up whole yards to find the problem spot. Now, they can dig one hole straight to the problem and replace, reseal or unclog the pipe. While these inspections can take a long time, they are well worth it.

Benefits of a Pipe Camera Inspection

Homeowners choose to get pipe camera inspections for a variety of reasons. Some request inspections to find the source of a problem they may be having, such as low water pressure or frequent clogs. Others may choose to get a pipe camera inspection solely for preventative maintenance or informational purposes.

Pipe camera inspections are the best way to get a close look at your piping and determine its condition. Even if your plumber finds that your piping is in excellent shape, you’ll feel better knowing than being in the dark. Whether you suspect a plumbing problem or not, pipe camera inspections have many benefits.

Non-Invasive

In the past when homeowners have requested inspections of their drain pipes, the entire pipe had to be dug up just to find the source of the problem. With camera inspections and other trenchless technology, the entire length of the pipe can be internally viewed and repaired with no hassle.

If the plumber does detect a problem, then the repair or replacement may require access through the backyard. Even then, with a camera inspection the plumber will be able to pinpoint almost exactly where the problem is. This minimizes the mess and the area that needs to be dug up.

Diagnostic Technology

Many homeowners request camera inspections for diagnostic purposes. If you have been experiencing issues with your plumbing then scheduling a camera inspection is a great way to diagnose. Through trenchless technology plumbers can diagnose:

Hidden pipe and slab leaks that may be causing water pooling
Clogs and other debris buildup
Corrosion and rust formation
Tree root infiltration
And more!

Pipe camera inspections are excellent for diagnosing problems throughout the entirety of your drain pipe, even the hard to reach areas. If your plumber does detect an issue, be sure to get it repaired right away. Neglected plumbing issues, especially leaks, can quickly turn into expensive nightmares.

Preventative Maintenance

Some homeowners choose to schedule a drain pipe camera inspection even if they don’t have any issues with their plumbing. This is a great way to detect issues early or to learn more about how to care for your drains and plumbing. Even the most minor issue, such as a small clog, can eventually turn into a larger and more expensive one.

The last thing that you want to deal with is an unexpected pipe leak in your backyard or a flooding, clogged sink. This is why when you schedule pipe camera inspections, you are protecting your plumbing system and yourself.

Evidence for Insurance Purposes or Purchasing a Home

Many homeowners choose to get a video of their camera pipe inspection for their insurance. A video of the interior of your piping is evidence of the condition of your plumbing system. This is a great way to lower your insurance rates or to provide evidence for an insurance claim.

Not all insurance companies cover plumbing repair and services, but most of them do cover clean-up. That way, if a plumber needs to tear out some landscaping and grass, you can file a claim to cover the cost of replacing that.

Those who are looking to buy a home may also be interested in requesting a pipe camera inspection. You can inspect an air conditioner and furnace yourself when purchasing a home, but you can’t inspect the plumbing. Scheduling a camera inspection will let you know exactly what you’re getting into if you decide to purchase the home.

Schedule a Desoto Plumbing Appointment Today

If you are looking for a reliable plumber Desoto, TX to complete a camera pipe inspection for you, look no further than Dial One Johnson Plumbing, Cooling and Heating. Our team has the skill, expertise and qualifications to provide excellent plumbing services. From camera inspections and pipe replacements to water heater repair and clogged toilets, we have got your back.

Dial One Johnson is a family-owned and operated company with over 50 years serving Desoto and the surrounding area. Our team is dedicated to providing dependable and high quality workmanship. We know how difficult it can be to trust a stranger with expensive equipment in your home. That is why our technicians will walk you through everything that they do and are happy to answer any questions you may have.

For an experienced and trustworthy Desoto plumbing company, contact Dial One Johnson Plumbing, Cooling and Heating. Schedule service here or call us anytime at 972-291-0740.